Request a Quote for 36137-1 W K Engineering International Inc Part With the NSN 5340-01-070-1745 Today

Part Number: 36137-1

Alternate P/N: 361371

Manufacturer: W K Engineering International Inc

NSN: 5340-01-070-1745

NIIN: 010701745

Item Name : Bracket Angle

CAGE Code: 58748

FSC: 5340 Hardware Commercial

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 01

Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 36137-1, a W K Engineering International Inc item with the NSN 5340010701745 that is listed alongside the description “Bracket Angle.” If you are interested in part number 36137-1 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 36137-1 is specifically listed with the NSN 5340-01-070-1745, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to W K Engineering International Inc, this NSN part was specifically produced under CAGE Code 58748. With our services and dedication to simple procurement in mind, get started with us today!

NSN Information for Part Number 36137-1 with NSN 5340-01-070-1745, 5340010701745

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-070-1745 Item PartTypeName: BRACKET,ANGLE	5340	010701745	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
36137-1	2	2	3

Characteristics Data of NSN 5340-01-070-1745, 5340010701745

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	COUNTERSUNK
ADLK	FIRST LEG LENGTH	0.880 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	6.752 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	4.123 INCHES NOMINAL
AHLG	SECOND LEG CORNER RADIUS	0.440 INCHES NOMINAL
AHLK	FIRST LEG HOLE DIAMETER	0.271 INCHES MINIMUM AND 0.278 INCHES MAXIMUM
AHLN	SECOND LEG HOLE DIAMETER	0.271 INCHES MINIMUM AND 0.278 INCHES MAXIMUM
AHLR	SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH	3.243 INCHES NOMINAL
AHLT	SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH	1.809 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.125 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.125 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	5.250 INCHES NOMINAL
AHQP	FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL
AHQU	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.750 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.320 INCHES NOMINAL
AJZU	FIRST LEG STYLE	CORNER RADIUS
AKBU	SECOND LEG STYLE	CORNER RADIUS
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	LEFT HAND USAGE; HEAT TREATMENT: MIL-H-6088,T-76 COND
MATT	MATERIAL	ALUMINUM ALLOY 7075
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/13,0 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	ANODIZE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	ANGLE