Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 4SUBA2513, a Wayne Kerr Electronics Inc item with the NSN 5340014989726 that is listed alongside the description “Bracket Angle.” If you are interested in part number 4SUBA2513 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 4SUBA2513 is specifically listed with the NSN 5340-01-498-9726, and this code can be used to determine that it falls under FSC 5340 Hardware Commercial. Additionally, while tracing back to Wayne Kerr Electronics Inc, this NSN part was specifically produced under CAGE Code 3FYD5. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-498-9726 Item PartTypeName: BRACKET,ANGLE | 5340 | 014989726 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | U | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7SU2513 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | COUNTERSUNK |
| ADLK | FIRST LEG LENGTH | 10.0 MILLIMETERS NOMINAL |
| ADLL | SECOND LEG LENGTH | 34.0 MILLIMETERS NOMINAL |
| AGAV | END ITEM IDENTIFICATION | ELECT TEST EQUIP - GPETE |
| AHLF | SECOND LEG WIDTH | 92.0 MILLIMETERS NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 2.8 MILLIMETERS NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 2.8 MILLIMETERS NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 56.5 MILLIMETERS NOMINAL |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 10.8 MILLIMETERS NOMINAL |
| AHLU | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 10.8 MILLIMETERS NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 15.8 MILLIMETERS NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 17.0 MILLIMETERS NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.0018 MILLIMETERS NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.0018 MILLIMETERS NOMINAL |
| AHQN | FIRST LEG WIDTH | 10.0 MILLIMETERS NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.5 MILLIMETERS NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 5.0 MILLIMETERS NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | REG. BKT. |
| FEAT | SPECIAL FEATURES | FIRST LEG REFERS TO 2 10X10 TABS ON EACH END OF BRACKET; SECOND LEG'S 4 HOLES ARE C'SK 90 DEGREES X 5.7; SECOND LEG ALSO HAS 3 HOLES 9.25 DIAM (TO FIT M3 PEM), 2 ARE 5.0 FROM EACH SHORT SIDE AND 17.0 FROM LONG EDGE, THIRD HOLE IS 29.0 FROM |
| MATT | MATERIAL | ALUMINUM |
| STYL | STYLE DESIGNATOR | ANGLE |
| ACHY | MOUNTING HOLE TYPE | COUNTERSUNK |
| ADLK | FIRST LEG LENGTH | 10.0 MILLIMETERS NOMINAL |
| ADLL | SECOND LEG LENGTH | 34.0 MILLIMETERS NOMINAL |
| AGAV | END ITEM IDENTIFICATION | ELECT TEST EQUIP - GPETE |
| AHLF | SECOND LEG WIDTH | 92.0 MILLIMETERS NOMINAL |
| AHLK | FIRST LEG HOLE DIAMETER | 2.8 MILLIMETERS NOMINAL |
| AHLN | SECOND LEG HOLE DIAMETER | 2.8 MILLIMETERS NOMINAL |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 56.5 MILLIMETERS NOMINAL |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 10.8 MILLIMETERS NOMINAL |
| AHLU | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 10.8 MILLIMETERS NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 15.8 MILLIMETERS NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 17.0 MILLIMETERS NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.0018 MILLIMETERS NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.0018 MILLIMETERS NOMINAL |
| AHQN | FIRST LEG WIDTH | 10.0 MILLIMETERS NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.5 MILLIMETERS NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 5.0 MILLIMETERS NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | SQUARE |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | REG. BKT. |
| FEAT | SPECIAL FEATURES | FIRST LEG REFERS TO 2 10X10 TABS ON EACH END OF BRACKET; SECOND LEG'S 4 HOLES ARE C'SK 90 DEGREES X 5.7; SECOND LEG ALSO HAS 3 HOLES 9.25 DIAM (TO FIT M3 PEM), 2 ARE 5.0 FROM EACH SHORT SIDE AND 17.0 FROM LONG EDGE, THIRD HOLE IS 29.0 FROM |
| MATT | MATERIAL | ALUMINUM |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
