Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number IJH758-20, a Westinghouse Electric Corp item with the NSN 3130002710084 that is listed alongside the description “Bearing Unit Roller.” If you are interested in part number IJH758-20 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number IJH758-20 is specifically listed with the NSN 3130-00-271-0084, and this code can be used to determine that it falls under FSC 3130 Bearings Mounted. Additionally, while tracing back to Westinghouse Electric Corp, this NSN part was specifically produced under CAGE Code 79500. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-271-0084 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 002710084 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SAF22315MCC3HELD | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.6250 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 1.2500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 75.00 MILLIMETERS NOMINAL |
| ACYB | BASE THICKNESS | 1.3125 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 10.3750 INCHES MINIMUM AND 11.6250 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.1250 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 7.8125 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 6.2500 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 13.7500 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | PIPE PLUG |
| AGNF | BASE LENGTH | 3.8750 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | LOOSE |
| AHZC | ASSEMBLY OVERALL LENGTH | 6.2500 INCHES NOMINAL |
| AKRF | SEAL TYPE | PISTON RING |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 4.0000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 60.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| FEAT | SPECIAL FEATURES | DRAIN PLUGS LOCATED ON BOTH SIDES OF THE HOUSING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL SEAL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,OPTIONAL SPLIT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
