Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 364938, a White Motor Corp item with the NSN 2520007372138 that is listed alongside the description “Shaft Axle Automotive.” If you are interested in part number 364938 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 364938 is specifically listed with the NSN 2520-00-737-2138, and this code can be used to determine that it falls under FSC 2520 Vehicle Power Transmission Components. Additionally, while tracing back to White Motor Corp, this NSN part was specifically produced under CAGE Code 65282. With our services and dedication to simple procurement in mind, get started with us today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-737-2138 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 007372138 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12C7046 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZQ | HOLE DEPTH | 0.531 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 41.188 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 35.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C |
| AGGP | DRILLED HOLE DIAMETER | 0.982 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.859 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 1.879 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.655 INCHES MINIMUM AND 1.662 INCHES MAXIMUM |
| BNTC | FIRST END FACILITY WIDTH | 0.151 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |
| BNTD | FIRST END FACILITY LOCATION | LOCATED 2.408 IN. MIN.,2.418 IN. MAX FROM STRAIGHT SPLINE |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNTX | END HOLE TYPE | DRILLED |
| MATT | MATERIAL | STEEL |
| AMDM | FIRST END SPLINE LENGTH | 2.9062 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 1.600 INCHES MINIMUM AND 1.608 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 1 |
| BBCD | FIRST END SPLINE QUANTITY | 12 |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
