Thank you for taking an interest in the various military and defense parts, aerospace parts, and other items that we offer. You have reached the RFQ page for part number 380-10008, a X Technologies Inc item with the NSN 5905012076970 that is listed alongside the description “Resistor Variable Nonwire Wound.” If you are interested in part number 380-10008 and wish to learn more about your purchasing options, be sure to submit the form below at your earliest convenience while supplying us with important information concerning your needs and restrictions alike. Once we have a chance to receive and review your completed form, a member of our staff will reach out to you in 15 minutes or less to present a tailored solution for your comparisons.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that shopping with us is as simple as possible, we make it easy to identify and procure exact items by listing parts alongside all applicable designations and information. For example, part number 380-10008 is specifically listed with the NSN 5905-01-207-6970, and this code can be used to determine that it falls under FSC 5905 Resistors. Additionally, while tracing back to X Technologies Inc, this NSN part was specifically produced under CAGE Code 1JDN2. With our services and dedication to simple procurement in mind, get started with us today!
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-01-207-6970 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 012076970 | 0 | N | B | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | B | A | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
380-10008-501 | 2 | 2 | 1 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 3 |
AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
ABPA | UNDERCUT DIAMETER | 0.125 INCHES NOMINAL |
ABPM | BODY DIAMETER | 0.625 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 1.219 INCHES NOMINAL |
ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
ADAQ | BODY LENGTH | 1.990 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND,STEPPED |
AEEA | SWITCH TYPE | ROTARY |
AEED | SWITCH VOLTAGE RATING IN VOLTS | 117.0 |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED |
AGQL | UNDERCUT LENGTH | 0.281 INCHES NOMINAL |
AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
ARNH | OPERATING POSITION | START OF ROTATION |
AXGY | MOUNTING METHOD | STANDARD BUSHING |
CBBL | FEATURES PROVIDED | SHAFT SEAL AND SWITCH |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 1000.000 OHMS SINGLE SECTION |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR 1ST SECTION AND 1.8 FREE AIR 2ND SECTION AND 1.8 FREE AIR 3RD SECTION |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC |
FEAT | SPECIAL FEATURES | RESISTOR BODY IS ENVIRONMENTALLY SEALED,STEPPED SHAFT IS FLATTED,INNER SHAFT CONTROLS SECOND AND THIRD RESISTORS PLUS SWITCH,OUTER SHAFT CONTROLS THE RESISTOR NEAREST THE FRONT |
TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LOOP |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote